李金城 
編號 | 中文名稱 | 英文名稱 |
BS 3766-1978 | 機床用冷卻液泵規范 | Specification for coolant pumps for machine tools |
BS 4082-1-1969 | 立式管線離心泵外部尺寸規范.第1部分:"I"型 | Specification for external dimensions for vertical in-line centrifugal pumps - 'I' Type |
BS 4082-2-1969 | 立式管線離心泵外部尺寸規范.第2部分:"U"型 | Specification for external dimensions for vertical in-line centrifugal pumps - 'U' Type |
BS 4617-1983 | 液壓流體動力傳輸用動力泵和電動機性能的測定方法 | Methods for determining the performance of pumps and motors for hydraulic fluid power transmission |
BS 5173-102.3-1988 | 橡膠和塑料軟管及軟管組件試驗方法.第102部分:液壓試驗.第3節:燃料分配泵軟管體積膨脹測定 | Methods of test for rubber and plastics hoses and hose assemblies - Hydraulic pressure tests - Determination of volumetric expansion of fuel-dispensing pump hoses |
BS 5257-1975 | 臥式端吸離心泵(16bar)規范 | Specification for horizontal end-suction centrifugal pumps (16 bar) |
BS 5860-1980 | 水輪機、蓄水泵及渦輪泵的效率測定方法(熱力學法) | Method for measuring the efficiency of hydraulic turbines, storage pumps and pump-turbines (thermodynamic method) |
BS 5944-1-1992 | 液壓動力系統和部件氣動噪聲測量.第1部分:液壓泵試驗方法 | Measurement of airborne noise from hydraulic fluid power systems and components - Method of test for pumps |
BS 5944-5-1985 | 液壓系統和部件氣動噪音測量.第5部分:使消聲室測定液壓泵聲功率等級的簡易方法 | Measurement of airborne noise from hydraulic fluid power systems and components - Simplified method of determining sound power levels from pumps using an anechoic chamber |
BS 5944-6-1992 | 液壓動力系統和部件氣動噪聲測量.第6部分:平行六面體傳聲器陣列測試液壓泵噪聲 | Measurement of airborne noise from hydraulic fluid power systems and components - Method of test for pumps using a parallelepiped microphone array |
BS 6169-1-1981 | 液態烴類體積測量方法.第1部分:置換流量計系統(不包括配劑泵) | Methods for volumetric measurement of liquid hydrocarbons - Displacement meter systems (other than dispensing pumps) |
BS 6907-4-1988 | 露天礦和采石場的電氣裝置.第4部分:開采、層疊和處理機械設備、泵和低信號級及通信系統推薦標準 | Electrical installations for open-cast mines and quarries - Recommendations for winning, stacking and processing machinery, pumps and low signal level and communications systems |
BS 7117-2-1991 | 安裝在加油站并用以加液體燃料的計量泵和分配器.安裝指南 | Metering pumps and dispensers to be installed at filling stations and used to dispense liquid fuel - Guide to installation |
BS 7117-3-1991 | 安裝在加油站并用以加液體燃料的計量泵和分配器.安裝后維護指南 | Metering pumps and dispensers to be installed at filling stations and used to dispense liquid fuel - Guide to maintenance after installation |
BS 7250-1989 | 液壓傳動正排量泵和電動機導出量的測定方法 | Methods of determining the derived capacity of hydraulic fluid power positive displacement pumps and motors |
BS 7929-1999 | 泵鑄造設計程序鑒定指南 | Guide for the verification of a pump casing design procedure |
BS 799-7-1988 | 燃油設備.第7部分:有旋轉軸和外部傳動裝置的霧化燃油器泵的尺寸規范 | Oil burning equipment - Specification for dimensions of atomizing oil burner pumps with rotating shaft and external drive |
BS 8204-7-2003 | 找平層、底基和現場鋪筑地板材料.可泵送自找平找平層.實施規范 | Screeds, bases and in-situ floorings - Pumpable self-smoothing screeds - Code of practice |
BS DD CEN/TS 14825-2004 | 對流式供暖和制冷用帶有電動壓縮機的空氣調節器、液體制冷包和熱泵.部分負載條件下的檢驗和額定 | Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Testing and rating at part load conditions |
BS DD ENV 12102-1997 | 帶電驅動壓縮機的空調、加熱泵和除濕器.空氣噪聲的測量.聲功率水平的測定 | Air conditioners, heat pumps and dehumidifiers with electrically driven compressors - Measurement of airborne noise - Determination of the sound power level |
BS DD IEC TS 62091-2003 | 低壓開關設備和控制設備.固定式消防泵驅動器用控制器 | Low-voltage switchgear and controlgear - Controllers for drivers of stationary fire pumps |
BS EN 1012-1-1997 | 壓縮機和真空泵.安全性要求.壓縮機 | Compressors and vacuum pumps - Safety requirements - Compressors |
BS EN 1012-2-1997 | 壓縮機和真空泵.安全性要求.真空泵 | Compressors and vacuum pumps - Safety requirements - Vacuum pumps |
BS EN 1028-1-2002 | 消防泵.起動注油器的消防離心泵.分類.總則和安全性要求 | Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Classification - General and safety requirements |
BS EN 1028-2-2002 | 消防泵.帶起動油泵的消防離心泵.一般要求和安全性要求的驗證 | Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Verification of general and safety requirements |
BS EN 1076-1997 | 工作地點的環境.測定氣體和蒸氣用的泵吸附管.要求和試驗方法 | Workplace atmospheres - Pumped sorbent tubes for the determination of gases and vapours - Requirements and test methods |
BS EN 12157-1999 | 離心泵.機床用冷卻液泵裝置.公稱流動速率、尺寸 | Rotodynamic pumps - Coolant pump units for machine tools - Nominal flow rate, dimensions |
BS EN 12162-2001 | 液體泵.安全要求.液壓靜態試驗程序 | Liquid pumps - Safety requirements - Procedure for hydrostatic testing |
BS EN 12178-2003 | 制冷系統和熱泵.液位指示設備.要求、試驗和標記 | Refrigerating systems and heat pumps - Liquid level indicating devices - Requirements, testing and marking |
BS EN 12262-1999 | 旋轉動力泵.技術文獻.術語,交付范圍,布局 | Rotodynamic pumps - Technical documents - Terms, delivery range, layout |
BS EN 12263-1999 | 制冷系統和熱力泵.限壓安全開關裝置.要求和試驗 | Refrigerating systems and heat pumps - Safety switching devices for limiting the pressure - Requirements and tests |
BS EN 12284-2003 | 冷卻系統和加熱泵.閥.要求、試驗及標記 | Refrigerating systems and heat pumps - Valves - Requirements, testing and marking |
BS EN 12309-1-2000 | 凈熱輸入不超過70KW的燃?xì)馕蘸臀湛諝庹{(diào)節式和/或熱力泵裝置 | Gas-fired absorption and adsorption air-conditioning and/or heat pump appliances with a net heat input not exceeding 70 kW - Safety |
BS EN 12309-2-2000 | 凈熱輸入不超過70KW的燃?xì)馕蘸臀湛諝庹{(diào)節式和/或熱力泵裝置.能量的合理使用 | Gas-fired absorption and adsorption air-conditioning and/or heat pump appliances with a net heat input not exceeding 70 kW - Rational use of energy |
BS EN 1232-1997 | 工作場所環境.化學試劑的小型專用抽樣泵.要求和試驗方法 | Workplace atmospheres - Pumps for personal sampling of chemical agents - Requirements and test methods |
BS EN 12462-1998 | 生物技術.泵性能準則 | Biotechnology - Performance criteria for pumps |
BS EN 12483-1999 | 液泵.帶變頻機的泵裝置.擔保和兼容性試驗 | Liquid pumps - Pump units with frequency inverters - Guarantee and compatibility tests |
BS EN 12514-1-2000 | 油燃燒器供油系統的安裝.安全性要求和試驗.零部件、供油泵、控制和安全裝置、供油罐 | Installations for oil supply systems for oil burners - Safety requirements and tests - Parts, oil feed pumps, control and safety devices, supply tanks |
BS EN 12583-2000 | 供氣系統.壓縮機泵站.功能要求 | Gas supply systems - Compressor stations - Functional requirements |
BS EN 12639-2000 | 液壓泵和泵組.噪音測試規程.2級和3級精度 | Liquid pumps and pump units - Noise test code - Grade 2 and grade 3 of accuracy |
BS EN 12723-2000 | 液壓泵.泵和設備的通用術語.定義、數量、字母符號和單位 | Liquid pumps - General terms for pumps and installations - Definitions, quantities, letter symbols and units |
BS EN 12919-1999 | 工作場所空氣.體積流速大于51/min的化學試劑取樣用泵.要求和試驗方法 | Workplace atmospheres - Pumps for the sampling of chemical agents with a volume flow rate of over 51/min - Requirements and test methods |
BS EN 13136-2001 | 滅火系統和熱力泵.釋壓裝置和配套管道.計算方法 | Refrigerating systems and heat pumps - Pressure relief devices and their associated piping - Methods for calculation |
BS EN 13275-2000 | 低溫容器.低溫設備用泵 | Cryogenic vessels - Pumps for cryogenic service |
BS EN 13313-2002 | 制冷系統和加熱泵.人員的能力. | Refrigerating systems and heat pumps - Competence of personnel |
BS EN 13617-1-2004 | 加油站.計量泵、分配器和遙控泵送裝置的性能和建造的安全要求 | Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units |
BS EN 13617-2-2004 | 加油站.計量泵和配油器上安全制動器的建造和性能的安全要求 | Petrol filling stations - Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers |
BS EN 13617-4-2004 | 加油站.計量泵和配油器用轉環的建造和性能的安全與環境要求 | Petrol filling stations - Safety and environmental requirements for construction and performance of swivels for use on metering pumps and dispensers |
BS EN 13951-2003 | 液泵.安全要求.農產食品設備.使用中衛生保證的設計原則 | Liquid pumps - Safety requirements - Agrifoodstuffs equipment - Design rules to ensure hygiene in use |
BS EN 14275-2003 | 車用燃料.汽油及柴油質量的評估.零售點油泵及商業點燃料自動售貨機的抽樣 | Automotive fuels - Assessment of petrol and diesel fuel quality - Sampling from retail site pumps and commercial site fuel dispensers |
BS EN 14343-2005 | 旋轉容積泵.驗收性能試驗 | Rotary positive displacement pumps — Performance tests for acceptance |
BS EN 14466-2005 | 消防泵.便攜式消防泵.安全和性能要求、試驗 | Fire fighting pumps - Portable pumps - Safety and performance requirements, tests |
BS EN 14511-1-2004 | 房間取暖和制冷用帶電動壓縮機的空氣調節裝置、液冷組件和熱泵.術語和定義 | Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling |
BS EN 14511-2-2004 | 房間取暖和制冷用帶電動壓縮機的空氣調節裝置、液冷組件和熱泵.試驗條件 | Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Test conditions |
BS EN 14511-3-2004 | 房間取暖和制冷用帶電動壓縮機的空氣調節裝置、液冷組件和熱泵.試驗方法 | Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Test methods |
BS EN 14511-4-2004 | 房間取暖和制冷用帶電動壓縮機的空氣調節裝置、液冷組件和熱泵.要求 | Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Requirements |
BS EN 14662-1-2005 | 環境空氣質量.測量苯濃度的標準方法.熱解吸和氣相色譜法后的泵取樣 | Ambient air quality - Standard method for measurement of benzene concentrations - Pumped sampling followed by thermal desorption and gas chromatography |
BS EN 14662-2-2005 | 環境空氣質量.苯濃度測量的標準方法.溶劑解吸和氣相色譜法后的泵送取樣 | Ambient air quality - Standard method for measurement of benzene concentrations - Pumped sampling followed by solvent desorption and gas chromatography |
BS EN 14662-3-2005 | 環境空氣質量.測量苯濃度的標準方法.自動泵取樣和現場氣相色譜法 | Ambient air quality - Standard method for measurement of benzene concentrations - Automated pumped sampling with in situ gas chromatography |
BS EN 14710-1-2005 | 消防泵.無起動注油器的消防離心泵.分類、一般要求和安全要求 | Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Classification, general and safety requirements |
BS EN 14710-2-2005 | 消防泵.無起動注油器的消防離心泵.一般要求和安全要求的驗證 | Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Verification of general and safety requirements |
BS EN 1736-2000 | 制冷系統和熱力泵.柔性管元件.振動隔絕器和膨脹節.要求,設計和安裝 | Refrigerating systems and heat pumps - Flexible pipe elements, vibration isolators and expansion joints - Requirements, design and installation |
BS EN 1861-1998 | 制冷系統和熱力泵.系統流量圖,管道和設備圖.布局和符號 | Refrigerating systems and heat pumps - System flow diagrams and piping and instrument diagrams - Layout and symbols |
BS EN 1947-2002 | 消防軟水管.消防泵和車用半剛性輸送軟水管和水管組件 | Fire-fighting hoses - Semi-rigid delivery hoses and hose assemblies for pumps and vehicles |
BS EN 22858-1993 | 端吸式離心泵(額定壓力16巴).命名、標稱效率點和尺寸 | End-suction centrifugal pumps (rating 16 bar) - Designation, nominal duty point and dimensions |
BS EN 23661-1993 | 端吸式離心泵的底板和安裝尺寸 | End-suction centrifugal pumps - Baseplate and installation dimensions |
BS EN 255-3-1997 | 帶電動壓縮機的空調器.液體制冷設備和熱力泵.加熱方式.衛生間熱水裝置的試驗和標記要求 | Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors - Heating mode - Testing and requirements for marking for sanitary hot water units |
BS EN 378-1-2000 | 制冷系統和加熱泵規范.安全性和環境要求.基本要求、定義、分類和選擇規范 | Specification for refrigerating systems and heat pumps - Safety and environmental requirements - Basic requirements, definitions, classification and selection criteria |
BS EN 378-2-2000 | 制冷系統和加熱泵規范.安全性和環境要求.設計、制造、試驗、標記和文獻 | Specification for refrigerating systems and heat pumps - Safety and environmental requirements - Design, construction, testing, marking and documentation |
BS EN 378-3-2000 | 制冷系統和加熱泵規范.安全性和環境要求.安裝現場和人員保護 | Specification for refrigerating systems and heat pumps - Safety and environmental requirements - Installation site and personal protection |
BS EN 378-4-2000 | 制冷系統和加熱泵規范.安全性和環境要求.操作、維修、檢修和回收 | Refrigerating systems and heat pumps - Safety and environmental requirements - Operation, maintenance, repair and recovery |
BS EN 45510-5-4-1998 | 發電站設備采購指南.水輪機、蓄水泵和水泵水輪機 | Guide for the procurement of power station equipment - Hydraulic turbines, storage pumps and pump-turbines |
BS EN 45510-6-4-2000 | 發電站設備采購指南.渦輪機輔助設備.泵 | Guide for the procurement of power station equipment - Turbine auxiliaries - Pumps - Pumps |
BS EN 50216-7-2002 | 電力變壓器和反應堆配件.運輸油用電泵 | Power transformers and reactor fittings - Electric pumps for transformer oil |
BS EN 60041-1995 | 水輪機,現場驗收試驗測定蓄水泵和渦輪泵液壓性能 | Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pump-turbines |
BS EN 60193-1999 | 水輪機、蓄水泵和泵輪機.模型驗收試驗 | Hydraulic turbines, storage pumps and pump-turbines — Model acceptance tests |
BS EN 60335-2-40-2003 | 家用和類似用途電器的安全規范.特殊要求.電熱泵、空氣調節器和去濕器 | Household and similar electrical appliances - Safety - Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers |
BS EN 60335-2-41-2003 | 家用和類似用途電器.泵的特殊要求 | Household and similar electrical appliances - Particular requirements for pumps |
BS EN 60335-2-51-2003 | 家用和類似用途電器的安全.加熱和供水設施用固定式循環泵的特殊要求 | Specification for safety of household and similar electrical appliances - Particular requirements for stationary circulation pumps for heating and service water installations |
BS EN 60601-2-24-1998 | 醫療電氣設備.特殊安全要求.輸液泵和控制器的特殊安全要求. | Medical electrical equipment - Particular requirements for safety - Particular requirements for the safety of infusion pumps and controllers |
BS EN 60609-1-2005 | 水輪機、蓄能泵和水泵水輪機.氣蝕損壞的評定.反擊式水輪機、蓄能泵和水泵水輪機的評定 | Hydraulic turbines, storage pumps and pump-turbines - Caviatation pitting evaltuation - Evalution in reaction turbines, storage pumps and pumps-turbines |
BS EN 60609-2-1998 | 水輪機、蓄能泵和水泵水輪機氣蝕損壞的評定.水斗式水輪機的評定 | Cavitation pitting evaluation in hydraulic turbines, storage pumps and pump turbines - Evaluation in Pelton turbines |
BS EN 60994-1993 | 水力機械(水輪機、蓄水泵和水輪泵)振動和脈動現場測量指南 | Guide for field measurement of vibrations and pulsations in hydraulic machines (turbines, storage pumps and pump-turbines) |
BS EN 61290-6-1-1998 | 光纖放大器.基本規范.泵漏參數測試方法.光信號分離器 | Optical fibre amplifiers - Basic specification - Test methods for pump leakage parameters - Optical demultiplexer |
BS EN 61702-2000 | 直接耦合光伏(PV)水泵系統的額定值 | Rating of direct coupled photovoltaic (PV) pumping systems |
BS EN 733-1995 | 帶支承架的額定值為10bar的端吸式離心泵.公稱負荷點、主要尺寸和命名系統 | End-suction centrifugal pumps, rating with 10 bar with bearing bracket - Nominal duty point, main dimensions, designation system |
BS EN 734-1995 | 側槽泵PN40.公稱負荷點、主要尺寸和命名系統 | Side channel pumps PN 40 - Nominal duty point, main dimensions, designation system |
BS EN 735-1995 | 旋轉動態泵的總體尺寸.公差 | Overall dimensions of rotodynamic pumps - Tolerances |
BS EN 752-6-1998 | 室外建筑物的排水和污水系統.泵抽排裝置 | Drain and sewer systems outside buildings - Pumping installations |
BS EN 809-1998 | 液體用泵和泵裝置.一般安全性要求 | Pumps and pump units for liquids - Common safety requirements |
BS EN ISO 13709-2003 | 石油、石化和天然氣工業用離心泵 | Centrifugal pumps for petroleum, petrochemical and natural gas industries |
BS EN ISO 13710-2004 | 石油、石化和天然氣工業.往復式變?nèi)菡婵毡?/span> | Petroleum, petrochemical and natural gas industries - Reciprocating positive displacement pumps |
BS EN ISO 14847-1999 | 回轉容積泵.技術要求 | Rotary positive displacement pumps - Technical requirements |
BS EN ISO 15136-1-2001 | 石油和天然氣工業的鉆孔設備.人工提升用步進式空腔泵系統.泵 | Downhole equipment for petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Pumps |
BS EN ISO 15783-2003 | 無密封旋轉動力泵.II級.規范 | Seal-less rotodynamic pumps - Class II - Specification |
BS EN ISO 16330-2003 | 往復式正排量泵和泵裝置.技術要求 | Reciprocating positive displacement pumps and pump units - Technical requirements |
BS EN ISO 20763-2004 | 石油和相關產品.液壓液耐磨性的測定.葉輪泵法 | Petroleum and related products - Determination of anti-wear properties of hydraulic fluids - Vane pump method |
BS EN ISO 21049-2005 | 泵.離心泵和旋轉泵用軸封系統 | Pumps - Shaft sealing systems for centrifugal and rotary pumps |
BS EN ISO 2151-2004 | 聲學.壓縮機和真空泵的噪聲試驗規范.工程法(2級) | Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (Grade 2) |
BS EN ISO 5198-1999 | 離心式混流軸向泵.液壓性能試驗規程.精密級 | Centrifugal, mixed flow and axial pumps - Code for hydraulic performance tests - Precision class |
BS EN ISO 5199-2002 | 離心泵的技術規范.2級 | Technical specifications for centrifugal pumps - Class II |
BS EN ISO 7886-2-1996 | 一次性使用無菌皮下注射器.動力驅動注射器泵的注射器 | Sterile hypodermic syringes for single use - Syringes for use with power-driven syringe pumps |
BS EN ISO 8849-2003 | 小艇.電動直流艙底泵 | Small craft - Electrically operated direct-current bilge-pumps |
BS EN ISO 9905-1994 | 離心泵技術規范.I類 | Technical specifications for centrifugal pumps - Class I |
BS EN ISO 9906-2000 | 渦輪式泵.液壓性能驗收試驗.1和2級 | Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1 and 2 |
BS EN ISO 9908-1994 | 離心泵技術規范.III類 | Technical specifications for centrifugal pumps - Class III |
BS IEC 60609-2-1998 | 水輪機、蓄能泵和水泵渦輪機空穴評估.水戽式水輪機的評估 | Cavitation pitting evaluation in hydraulic turbines, storage pumps and pump turbines - Evaluation in Pelton turbines |
BS IEC 61366-1-1998 | 水輪機、蓄能泵和水泵渦輪.投標文件.綜述及附錄 | Hydraulic turbines, storage pumps, and pump turbines - Tendering documents - General and annexes |
BS IEC 61366-2-1998 | 水輪機、蓄能泵和水泵渦輪.投標文件.弗蘭西斯渦輪機技術規范指南 | Hydraulic turbines, storage pumps, and pump turbines - Tendering documents - Guidelines for technical specifications for Francis turbines |
BS IEC 61366-3-1998 | 水輪機、蓄能泵和水泵渦輪.投標文件.水戽式水輪機的技術規范指南 | Hydraulic turbines, storage pumps, and pump turbines - Tendering documents - Guidelines for technical specifications for Pelton turbines |
BS IEC 61366-4-1998 | 水輪機、蓄能泵和水泵渦輪.投標文件.卡普蘭式水輪機和推進式水輪機的技術規范指南 | Hydraulic turbines, storage pumps, and pump turbines - Tendering documents - Guidelines for technical specifications for Kaplan and propeller turbines |
BS IEC 61366-5-1998 | 水輪機、蓄能泵和水泵渦輪.投標文件.管狀水輪機技術規范指南 | Hydraulic turbines, storage pumps, and pump turbines - Tendering documents - Guidelines for technical specifications for tubular turbines |
BS IEC 61366-6-1998 | 水輪機、蓄能泵和水泵渦輪.投標文件.水泵渦輪技術規范指南 | Hydraulic turbines, storage pumps, and pump turbines - Tendering documents - Guidelines for technical specifications for pump-turbines |
BS IEC 61366-7-1998 | 水輪機、蓄能泵和水泵渦輪.投標文件.蓄水泵技術規范指南 | Hydraulic turbines, storage pumps, and pump turbines - Tendering documents - Guidelines for technical specifications for storage pumps |
BS ISO 10767-1-1996 | 液壓流體動力.對系統和部件產生壓力波動級的測定.第1部分:泵精度法 | Hydraulic fluid power - Determination of pressure ripple levels generated in systems and components - Precision method for pumps |
BS ISO 10767-2-1999 | 液壓傳動.系統和元件中產生壓力波動值的測定.泵的簡化方法 | Hydraulic fluid power - Determination of pressure ripple levels generated in systems and components - Simplified method for pumps |
BS ISO 10816-5-2001 | 機械振動.在非旋轉部件上測量評價機械振動.水力發電廠和泵站機組 | Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Machine sets in hydraulic power and pumping plants |
BS ISO 12334-2000 | 航空航天.液壓的壓力補償?shù)淖兞枯斔捅?35000KPa系統的一般要求 | Aerospace - Hydraulic, pressure-compensated, variable delivery pumps - General requirements for 35000 kPa systems |
BS ISO 14617-9-2004 | 圖示的圖形符號.泵、壓縮機和風扇 | Graphical symbols for diagrams - Pumps, compressors and fans |
BS ISO 14681-1998 | 柴油發動機.燃料噴射泵試驗.燃料噴嘴的校準 | Diesel engines - Fuel injection pump testing - Calibrating fuel injectors |
BS ISO 14686-2003 | 液體比重的測定.水井的泵送試驗.設計、性能和使用的考慮和指南 | Hydrometric determinations - Pumping tests for water wells - Considerations and guidelines for design, performance and use |
BS ISO 16902-1-2003 | 液壓傳動.用聲強法測定聲功率級的試驗規程.工程法.泵 | Hydraulic fluid power - Test code for the determination of sound power levels using sound intensity techniques - Engineering method - Pumps |
BS ISO 17559-2004 | 液壓傳動.電控液壓泵.性能特征測定的試驗方法 | Hydraulic fluid power - Electrically controlled hydraulic pumps - Test methods to determine performance characteristics |
BS ISO 3019-1-2001 | 液力傳動.容積式泵和馬達的安裝法蘭盤和軸伸的尺寸及標識代碼.以米制單位表示的英制系列 | Hydraulic fluid power - Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors - Inch series shown in metric units |
BS ISO 3019-2-2001 | 液力傳動.容積式泵和馬達的安裝法蘭盤和軸伸的尺寸及標識代碼.米制系列 | Hydraulic fluid power - Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors - Metric series |
BS ISO 3069-2001 | 端吸離心泵.機械密封和軟密封件密封腔尺寸 | End-suction centrifugal pumps - Dimensions of cavities for mechanical seals and for soft packing |
BS ISO 4008-3-2003 | 道路車輛.噴油泵試驗.應用和試驗程序 | Road vehicles - Fuel injection pump testing - Application and test procedures |
BS ISO 4093-2000 | 柴油發動機.噴油泵.試驗用高壓管 | Diesel engines - Fuel injection pumps - High-pressure pipes for testing |
BS ISO 6145-2-2001 | 氣體分析.標定用混合氣體的制備.動態容量法.容積計量泵 | Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Volumetric pumps |
BS ISO 6519-2004 | 柴油機.噴油泵.軸端和轂盤的錐度 | Diesel engines - Fuel injection pumps - Tapers for shaft ends and hubs |
BS ISO 7299-1997 | 柴油發動機.燃油注射泵端面安裝法蘭盤 | Diesel engines - End-mounting flanges for fuel injection pumps |
BS ISO 7612-2006 | 柴油機.共軌燃料噴射系統用基座安裝直列式噴油泵和高壓供油泵.安裝尺寸 | Diesel engines - Base-mounted in-line fuel injection pumps and high-pressure supply pumps for common rail fuel injection systems - Mounting dimensions |
BS ISO 7879-1998 | 柴油發動機.托架安裝直列式燃料噴射泵.安裝尺寸 | Diesel engines - Cradle mounted in-line fuel injection pumps - Mounting dimensions |
BS ISO 7919-5-2005 | 機械振動.通過對旋轉軸的測量評價機械振動.水力發電廠和泵站機組 | Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Machine sets in hydraulic power generating and pumping plants |
BS ISO 8976-2004 | 夾扭鉗和剪切鉗.水泵鉗.尺寸和試驗值 | Pliers and nippers - Multiple slip joint pliers - Dimensions and test values |
BS M 65-1987 | 壓力補償變量液壓泵規范 | Specification for pressure compensated variable delivery hydraulic pumps |
DD ENV 12102-1997 | 帶電動壓縮機的空調器、熱力泵和除濕器.機載噪音的測量.噪音等級的測定. | Air conditioners, heat pumps and dehumidifiers with electrically driven compressors. Measurement of airborne noise. Determination of the sound power level |
KIT 76-2001 | 制冷系統和熱泵.安全和環境規定(BS EN 378) | Refrigeration and heat pumps - Safety and environment set (BS EN 378) |
日本Japan閥門標準JIS http://www.www.xuancar.com/newsdetail_507430.html
世界各國閥門標準代號http://www.www.xuancar.com/newsdetail_1979672.html
進口閥門,美標API標準http://www.www.xuancar.com/newsdetail_1979673.html
離心泵生產API標準http://www.www.xuancar.com/newsdetail_1931958.html
增壓泵生產標準http://www.www.xuancar.com/newsdetail_1956731.html
磁力泵生產標準http://www.www.xuancar.com/newsdetail_1869919.html
進口美國泵ANSI標準http://www.www.xuancar.com/newsdetail_1981149.html
